spec no: dsaa6317 rev no: v.4 date: mar/14/2005 page: 1 o f 4 approved: j. lu checked: allen liu drawn: b.h.li package dimension s 1.6x0.8mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches) . 2. tolerance is 0 .1(0.004") unless otherwise noted . 3.specifications are subject to change without notice . description the yellow source color devices are made with gallium arsenide phosphide on gallium phosphide yellow light emitting diode. kp - 1608yc yellow features 1.6mmx0.8mm smt led, 1.1mm thickness. low power consumption. w ide view ing angle. ideal for backlight and indicator. various colors and lens types available. package: 2000pcs / reel . rohs compliant.
spec no: dsaa6317 rev no: v.4 date: mar/14/2005 page: 2 o f 4 approved: j. lu checked: allen liu drawn: b.h.li selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kp - 1608yc yellow (gaasp/gap) water clear 2.6 8 120 symbol parameter device typ. max. test conditions units peak peak wavelength yellow 590 nm i f =20ma d dominant wavelength yellow 588 nm i f =20ma ? 1/2 spectral line half - width yellow 35 nm i f =20ma c capacitance yellow 20 pf v f =0v;f=1mhz v f forward voltage yellow 2.1 2.5 v i f =20ma i r reverse current yellow 10 ua v r = 5v parameter yellow units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaa6317 rev no: v.4 date: mar/14/2005 page: 3 o f 4 approved: j. lu checked: allen liu drawn: b.h.li yellow kp - 1608yc
spec no: dsaa6317 rev no: v.4 date: mar/14/2005 page: 4 o f 4 approved: j. lu checked: allen liu drawn: b.h.li recommended soldering pattern (units : mm ) tape specifications (units : mm ) kp - 1608yc if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|